Edit Device Name
Import Root Certificate
Access Authen. Settings
(Setup)
Area/Date/Time Setting
Note
You can save up to 10 settings per memory card. When 10 settings have been already saved, you cannot perform [Save New].
Delete the existing settings using [Delete], or overwrite them.
You can save up to 60 settings in C3 Portal. When 60 settings have been already saved, you cannot perform [Save New].
Overwrite the existing settings or use C3 Portal to delete them.
Only Slot 1 is used for saving or loading data. You cannot change the saving/loading destination slot.
You cannot load settings from a camera of a different model.
Even if the model name is the same, settings from a camera with a different system software version may fail to load.
You can use this function to save settings registered to [ Camera Set. Memory]. However, [Save/Load Settings] is unavailable
when the mode dial is set to 1/2/3 ( Recall Camera Setting). Set the mode dial to a position other than 1/2/3 before using this
function.
Related Topic
C3 Portal
TP1001166614
5-056-662-11(1) Copyright 2023 Sony Corporation
You can save or load settings under [FTP Transfer Func.] by selecting MENU → (Network) → [FTP Transfer] → [FTP Transfer Func.] →
[Save/Load FTP Settings]. For details, refer to the “FTP Help Guide.”
https://rd1.sony.net/help/di/ftp_2380/h_zz/
*
To Next Page
Loading...
