Help Guide
Interchangeable Lens Digital Camera
ILCE-9M3 α9III
Multi-selector
You can move the focus area by pushing the multi-selector up/down/left/right. You can also assign a function to be
activated when you press the center of the multi-selector.
Put your finger right on top of the multi-selector to manipulate it more precisely.
You can move the focus area when [ Focus Area] is set to the following parameters:
[Zone]
[Spot: XL] / [Spot: L] / [Spot: M] / [Spot: S] / [Spot: XS]
[Expand Spot]
[Custom 1] - [Custom 3]
[Tracking: Zone]
[Tracking: Spot XL] / [Tracking: Spot L] / [Tracking: Spot M] / [Tracking: Spot S] / [Tracking: Spot XS]
[Tracking: Expand Spot]
[Tracking: Custom 1] - [Tracking: Custom 3]
The [Focus Standard] function is assigned to the center of the multi-selector in the default settings.
Related Topic
Selecting the focus area (Focus Area)
Focus Standard
TP1001159244
5-056-662-11(1) Copyright 2023 Sony Corporation
To Next Page
Loading...
