Only a value between -3.0 EV and +3.0 EV with the equivalent image brightness appears on the screen when shooting. If you set
an exposure compensation value outside this range, the image brightness on the screen will not be affected, but the value will be
reflected in the recorded image.
You can adjust the exposure compensation value within the range of -2.0 EV to +2.0 EV for movies.
Note
You cannot perform the exposure compensation in the following shooting modes:
[Intelligent Auto]
When using [Manual Exposure], you can perform the exposure compensation only when [ ISO] is set to [ISO AUTO].
If you shoot a subject in extremely bright or dark conditions, or when you use the flash, you may not be able to get a satisfactory
effect.
Related Topic
Exposure step (still image/movie)
Exp.comp.set
Cont. Bracket
Single Bracket
Zebra Display
TP1001150393
5-056-662-11(1) Copyright 2023 Sony Corporation
To Next Page
Loading...
