Hint
If you set [Touch Func. in Shooting] to [Touch Focus+AE], the brightness will be set according to the subject you touched. This will
also allow you to fine-tune the brightness by sliding the brightness adjustment bar that appears after touching.
In addition to the touch focus function, touch operations such as the following are also available.
The focusing frame for [Spot]/[Expand Spot]/[Custom] can be moved by dragging.
When shooting still images in the manual focusing mode, the focus magnifier can be used by double-tapping the monitor.
Note
The touch focus function is not available in the following situations:
When shooting still images in the manual focusing mode
When using the digital zoom in the still image shooting mode
When using the LA-EA4
Related Topic
Touch Operation
Touch Panel/Pad
Touch Panel Settings
Selecting the focus area (Focus Area)
TP1001159263
5-056-662-11(1) Copyright 2023 Sony Corporation
When the focus mode is set to [Continuous AF], the focus mode temporarily switches to manual focus, and the
focus can be adjusted using the focus ring (spot focus). Spot focus is not available when shooting with the
viewfinder.
To cancel spot focus, touch (Touch focus release) icon or press the center of the control wheel.
When the focus mode is set to [Manual Focus], the focus mode temporarily switches to [Continuous AF]. When
the touched area is in focus, the focus mode returns to manual focus.
To Next Page
Loading...
