Help Guide
Interchangeable Lens Digital Camera
ILCE-9M3 α9III
Sync Terminal Settings
Sets whether to output a flash signal when shooting with a flash connected to the (flash sync) terminal.
Menu item details
Auto:
A flash signal is output from the (flash sync) terminal only when the flash is connected to the Multi Interface Shoe and
ready to fire.
Always:
Always outputs a flash signal when shooting.
Note
The speed of continuous shooting becomes slower and the display quality of the viewfinder and monitor becomes lower when
[Sync Terminal Settings] is set to [Always].
Related Topic
Using a flash with a sync terminal cord
TP1001273215
5-056-662-11(1) Copyright 2023 Sony Corporation
MENU → (Exposure/Color) → [Flash] → [Sync Terminal Settings] → desired setting.
1
To Next Page
Loading...
