Help Guide
Interchangeable Lens Digital Camera
ILCE-9M3 α9III
Audio Signal Volume
Sets the volume of audio signals from the camera, such as the shutter sound and the sound when the focus is achieved.
Hint
The camera does not output audio signals when [Audio Signal Volume] is set to [0].
Note
You cannot check the sound volume while setting the sound volume level in the following situations.
When [Audio signals] is set to [Off]
When [Silent Mode] under [ Silent Mode Settings] is set to [On]
During movie recording
TP1001273229
5-056-662-11(1) Copyright 2023 Sony Corporation
MENU → (Setup) → [Sound Option] → [Audio Signal Volume].
1
Select the desired level using the left/right side of the control wheel.
You can check the sound volume by pressing the (Delete) button while setting the sound volume level.
2
To Next Page
Loading...
