Sony ILCE-9M3 - Page 557

Help Guide
Interchangeable Lens Digital Camera
ILCE-9M3 α9III
Select on Cam & Send (transferring to a smartphone)
You can transfer images to a smartphone by selecting images on the camera.
Refer to “Pairing the camera with a smartphone (Smartphone Connection) ” to pair the camera and smartphone in
advance.
The following is the procedure for transferring the image currently displayed on the camera.
Menu item details
Send:
Selects images and transfers them to a smartphone. ([This Image]/[All Images in This Group]/[All with this date]/[All
Filtered]/[Filtered Images]/[Multiple Images])
The options displayed may differ depending on the setting for [Playback Filter Condition] and the selected content.
If you select [Multiple Images], select the desired images using the center of the control wheel, then press MENU →
[Enter].
Size of Sending Image:
Selects the file size for images to be transferred to the smartphone. The original-sized JPEG/HEIF file or a 2M-equivalent
JPEG/HEIF file can be transferred. ([Original]/[2M])
RAW+J/H Send Target:
Selects the file type for images to be transferred to a smartphone when the images are shot with [ File Format] set to
[RAW & JPEG] or [RAW & HEIF]. ([JPEG & HEIF]/[RAW]/[RAW+J & RAW+H])
Sending Target:
Sets whether to transfer the low-bit-rate proxy movie or the high-bit-rate original movie when transferring a movie to a
smartphone. ([Proxy Only]/[Original Only]/[Proxy & Original])
When you select [Proxy Only], movies can be transferred faster than when transferring the original movies.
Movie with Shot Mark:
MENU → (Network) → [ Cnct./PC Remote] → [ Select on Cam & Send] → [Size of Sending Image],
[RAW+J/H Send Target], and [ Sending Target] → desired setting.
1
Display the image to be transferred on the playback screen.
2
MENU → (Network) → [ Cnct./PC Remote] → [ Select on Cam & Send] → [ Send] → [This
Image].
3
Launch Creators' App on your smartphone.
A message indicating that the transfer has started will appear.
4
Select [OK] on the smartphone.
The image will be transferred to the smartphone.
When the image is transferred, the (transferred) icon will appear on the screen of the camera.
You can transfer multiple images at once by selecting a setting other than [This Image] under [ Send].
5
557