Fi connection information displayed on the camera.
When connecting with a USB cable
Connect the USB Type-C terminal on the camera to the computer with a USB cable (commercially available).
Next, select [Remote Shoot (PC Remote)] on the screen displayed on the camera.
When connecting with a wired LAN
Set [Wired LAN Connect] to [On] and connect the camera to the computer or a switching hub using a commercially
available LAN cable. The camera and the computer need to be paired in advance if [Connect without Pairing] is set to
[Disable].
Connect the camera and the computer or switching hub using the LAN cable, and select [Pairing] under [PC Remote
Function] on the camera, then use Imaging Edge Desktop (Remote) to pair the camera and the computer. Select [OK] on
the pairing confirmation screen displayed on the camera to finish pairing.
Pairing information is deleted when you initialize the camera.
Hint
In [Remote Shoot Setting] under [ Cnct./PC Remote], you can set the save destination and saved format of still images for PC
remote shooting.
When [Access Authen.] is set to [Off] and you are connecting via a Wi-Fi access point, you need to pair the camera with the
computer. Select MENU → (Network) → [ Cnct./PC Remote] → [PC Remote Function] → [Pairing] after Step 1, and then
pair the camera and the computer using Imaging Edge Desktop (Remote) on the computer. Pairing information is deleted when
you initialize the camera.
Note
When shooting continuously using [PC Remote Function], the update interval of the live view display on the computer may
become longer.
Related Topic
Introduction to computer software (Imaging Edge Desktop/Catalyst)
Remote Shoot Setting
TP1001166649
5-056-662-11(1) Copyright 2023 Sony Corporation
To Next Page
Loading...
