ID Message Solution
1102 Finished. Please restart.
M: xx/B: xx/F: xx/R: xx/Font: xx
FPGA1: xx/2: xx/3: xx/4: xx
• M: Main
• B: Boot
• F: Firmware
• R: Register
• Font: Font
• xx:
- "O" : OK
- "E" : Error
- " － " : Not installed
This appears to display the results after installation of application software and
firmware is complete. If “E” (error) appears, try installing again. If the problem
persists, the MIX-54 board may be malfunctioning. So replace the MIX-54
board.
1103 Import Finished.
Please restart.
This appears when import of a configuration file is complete. Restart the unit.
MCS-8M
1-32
To Next Page
Loading...
