MHC-V5.GB.4-531-350-11(1)
36
GB
Play Timer/Recording Timer
Make sure you have set the clock.
Play Timer:
You can wake up to disc, tuner or
USB device at a preset time.
Recording Timer:
You can transfer music from a preset
radio station to a USB device at a
specified time.
1 Prepare the sound source.
For Play Timer:
Prepare the sound source, then
press VOLUME +/– to adjust the
volume.
When selecting a disc or USB device
as a sound source, and you want to
start from a specific track or file,
create your own program
(page18).
For Recording Timer:
Tune to the radio station
(page23).
2 Press TIMER MENU.
3 Press
/
repeatedly to select
“PLAY SET” or “REC SET,” then
press .
4 Set the time to start playback or
transfer.
Press
/
repeatedly to set the
hour/minute, then press .
5 Use the same procedure as in
step 4 to set the time to stop
playback or transfer.
6 Press
/
repeatedly to select
the sound source you want,
then press .
For Recording Timer, connect a USB
device to the B port after selecting
the sound source.
7 Press to turn o the system.
Note
If the system remains on, the timers will
not take eect.
To check the timer setting or
activate the timer again
1 Press TIMER MENU.
“TIMER SEL” flashes on the display.
2 Press .
3 Press
/
repeatedly to select
“PLAY SEL” or “REC SEL,” then
press .
To cancel the timer
Repeat the same procedure as
“To check the timer setting or
activate the timer again” and select
“TIMER OFF” in step 3, then press
.
Notes
ˎ
The system turns on before the preset
time. If the system is already turned
on at the preset time or if “STANDBY”
flashes on the display, the Play Timer
and the Recording Timer will not be
activated.
ˎ
Do not operate the system from the
time the system turns on until the
playback or transfer starts.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
