Sony MVS-6520 - Page 180

USO RESTRITO
180
Applying Special Effects (Edge Effects)
Chapter
10
DME
Operations
Example 1: When flex shadow is enabled on both of the two
channels
Image Image
Perspective
H = –100
Perspective
V = –100
Perspective
H = +100
Perspective
V = +100
Shadow Shadow
No combine shadow is set.
Inverting the flex shadow
In the <Invert> group of the Flex/Drop Shadow menu
(4115), select the direction to invert the shadow.
H: Invert the shadow in the horizontal direction. The
inversion is applied around the axis of the [Axis Loc
V] parameter set with [Axis Loc].
V: Invert the shadow in the vertical direction. The
inversion is applied around the axis of the [Axis Loc
H] parameter set with [Axis Loc].
Image
Flex
shadow
Combine shadow is enabled.
Density is set to 100.00.
Combine shadow is enabled.
Density is set to 0.00.
Before
inversion
After
inversion
Before
inversion
After
inversion
When H is enabled When V is enabled
Setting a combine shadow
When there are several images, this adds a flex shadow in
the depth of an image or overlays multiple flex shadows.