Sony MVS-6520 - Deletion

USO RESTRITO
Creating and Editing Keyframes 253
Chapter
12
Keyframes
6 Press the [MOD] button. Alternatively, hold down the
[SHFT] button and press the [MOD] button.
For the difference in the result, 1 “Differences in the
changes when a number of keyframes are modified”
(p. 253).
: Background A
: Background B
Differences in the changes when a number
of keyframes are modified
Keyframe 1 Keyframe 2 Keyframe 3
Modify keyframe 2.
Effect
execution
When you select a number of keyframes to modify, and
press the [MOD] button alone or in combination with the
[SHFT] button, the result of the operation differs as shown
below.
(Changing the position of
background B in the horizontal
direction)
Select keyframes 1 to 3 and
modify simultaneously.
Modifying the keyframes by pressing the [MOD]
button alone
The modified parameter values are taken as absolute
values, and applied to all of the selected keyframes.
Keyframe 1 Keyframe 2 Keyframe 3
Effect
execution
: Background A
: Background B
Result:
Background B of keyframes 1 and 3 is moved in the
horizontal direction by the same amount as in keyframe 2.
Keyframe 1 Keyframe 2 Keyframe 3
Effect
execution
Deletion
Modify keyframe 2.
(Changing the position of
background B in the horizontal
direction)
Select keyframes 1 to 3 and modify
simultaneously.
Deleting keyframes
1 Press the [EFF] button, then press the [EDIT ENBL]
button, turning it on.
2 Stop the effect at the desired edit point.
When the edit point is on a keyframe, this is what you
Keyframe 1 Keyframe 2 Keyframe 3
Result:
Effect
execution
delete. If the edit point is between two keyframes, the
previous keyframe is what you delete.
3 To delete a number of keyframes in a single operation,
The horizontal position of background B in keyframes 1
and 3 is now the same as that in keyframe 2.
In all keyframes, the vertical position remains unchanged
as the parameter is not changed.
Modifying the keyframes by holding down the
[SHFT] button and pressing the [MOD] button
The modified parameter values are taken as relative
values, which modify all of the selected keyframes.
press the [FROM TO] button or the [ALL] button.
If you press the [FROM TO] button, specify the
keyframe range.
For details about how to specify a range of keyframes,
1 “Modifying more than one keyframe
simultaneously” (p. 252).
4 Press the [DEL] button.
This deletes the keyframe.
Deleting a keyframe reduces the total duration of the
effect.
In constant duration mode ( 1 p. 241), however, the
duration does not change.
For details, 1 “Changes in the effect duration caused
by deleting a keyframe” (p. 242).