Portable Headphone Amplifier
PHA-3
Setting the sound quality (DSEE HX)
By setting the DSEE HX select switch to ON, you can enjoy better sound quality from your audio device connected to
the headphone amplifier.
1. Set the DSEE HX select switch to ON.
The compressed audio files are upgraded to a sound quality higher than that of a CD, and provides a dynamic
sound.
Note
The DSEE HX function will stop working when the signals below are transmitting to the headphone amplifier.
the optical signal
the analog signal
the linear PCM digital signal of sampling frequencies is more than 88.2 kHz
the DSD digital signal
4-547-524-11(4)
Copyright 2014 Sony Corporation
Help Guide
How to Use
To Next Page
Loading...
