PRS-505.GB.3-277-508-11(1)
Setting the Slideshow
Follow the steps below to configure the slideshow settings.
In the Home menu, press / to select “Settings,”
then press Enter.
The Setting menu appears.
Press / to select “Slideshow,” then press Enter.
The Slideshow setting screen appears.
Press Enter repeatedly to select “Off” or “On.”
The setting switches from “Off” to “On,” and the
slideshow setting is activated.
Press // to select “Slide Duration,” then press
the number buttons to input the duration time.
“Slide Duration” can be set up to 60 seconds in 1
second increments.
Press ///to select “OK,” then press Enter.
Notes
• The default setting of Slideshow is “Off.”
• When a large size picture is displayed, it may take longer to display
the picture than the indicated setting time on “Slide Duration.”
64
To Next Page
Loading...
