PRS-505.GB.3-277-508-11(1)
Setting the Advanced Settings
You can lock the Reader, format the built-in flash memory,
and shut down the Reader.
Locking the Reader
You can lock the Reader by setting a password.
Follow the steps below.
In the Home menu, press / to select “Settings,”
then press Enter.
The Setting menu appears.
Press / to select “Advanced Settings,” then press
Enter.
The Advanced Settings menu appears.
Press / to select “Device Lock,” then press Enter.
The Device Lock setting screen appears.
Press Enter repeatedly to select “Off” or “On.”
The setting switches from “Off” to “On,” and the Device
Lock setting is activated.
Note
• If the Device Lock is activated, the Reader is not recognized on
your computer and the content cannot be transferred.
Continued
67
To Next Page
Loading...
