1-12
48
About the audio output signals
The audio output differs as follows, depending on the source, output jack, and the selected settings.
*
1
“2 Channel” and “5.1 Channel” are selectable under “Audio Output Mode” in “Speakers” Setup (page 51).
*
2
PCM : when “Dolby Digital” or “DTS” in “Audio Setup” is set to “Downmix PCM” (page 47).
Bitstream : when “Dolby Digital” or “DTS” in “Audio Setup” is set to “Dolby Digital” or “DTS” (page 47).
*
3
Selectable under “Audio (HDMI)” in “Audio Setup” (page 47).
*
4
Selectable under “Audio (HDMI)” in “Audio Setup” (page 47). Resulting output may differ depending on the connected HDMI device.
*
5
When the sampling frequency is 192 kHz, the player downmixes to 2ch signals even if the disc or source is 5.1ch.
*
6
Outputs 7.1ch LPCM signals decoded from Dolby Digital Plus audio stream.
*
7
Outputs 7.1ch LPCM signals decoded from Dolby TrueHD audio stream.
The player outputs up to 7.1ch LPCM when the source sampling frequency is 48 kHz; up to 5.1ch at 96 kHz; up to 2ch at 192 kHz.
*
8
Outputs Dolby Digital Plus, Dolby TrueHD or DTS-HD High Resolution Audio bitstream from the HDMI OUT jack respectively when using the
AV amplifier compatible with Dolby Digital Plus, Dolby TrueHD or DTS-HD.
*
9
Outputs 7.1ch LPCM signals decoded from DTS-HD High Resolution Audio stream.
The player outputs up to 7.1ch LPCM when the source sampling frequency is 48 kHz; up to 5.1ch at 96 kHz.
AUDIO OUT L/R jacks*
1
DIGITAL OUT (OPTICAL/
COAXIAL) jacks*
2
HDMI OUT jack*
3
2ch 5.1ch PCM Bitstream PCM*
4
Auto*
4
BD-
ROM
Linear PCM 2ch 2ch 2ch 2ch LPCM 2ch LPCM 2ch LPCM 2ch LPCM
5.1ch
*
5
2ch Downmix 5.1ch
2ch Downmix
LPCM
2ch Downmix
LPCM
5.1ch LPCM 5.1ch LPCM
7.1ch 2ch Downmix
5.1ch
Downmix
2ch Downmix
LPCM
2ch Downmix
LPCM
7.1ch LPCM 7.1ch LPCM
Dolby Digital 2ch Downmix 5.1ch
2ch Downmix
LPCM
Dolby Digital 5.1ch LPCM Dolby Digital
Dolby Digital Plus 2ch Downmix 5.1ch
2ch Downmix
LPCM
Dolby Digital
7.1ch LPCM
(Dolby Digital
Plus)
*
6
Dolby Digital
Plus
*
8
Dolby TrueHD 2ch Downmix 5.1ch
2ch Downmix
LPCM
Dolby Digital
7.1ch LPCM
(Dolby
TrueHD)
*
7
Dolby
TrueHD
*
8
DTS 2ch Downmix 5.1ch
2ch Downmix
LPCM
DTS 5.1ch LPCM DTS
DTS-HD High
Resolution Audio
2ch Downmix 5.1ch
2ch Downmix
LPCM
DTS
7.1ch LPCM
(DTS-HD High
Resolution
Audio) *
9
DTS-HD High
Resolution
Audio
*
8
DTS-HD Master
Audio
2ch Downmix 5.1ch
2ch Downmix
LPCM
DTS 5.1ch LPCM DTS
DVD
Linear PCM 2ch 2ch 2ch LPCM 2ch LPCM 2ch LPCM 2ch LPCM
Dolby Digital 2ch Downmix 5.1ch
2ch Downmix
LPCM
Dolby Digital 5.1ch LPCM Dolby Digital
DTS 2ch Downmix 5.1ch
2ch Downmix
LPCM
DTS 5.1ch LPCM DTS
MPEG 2ch 2ch 2ch LPCM — 2ch LPCM 2ch LPCM
CD
Linear PCM 2ch 2ch 2ch 2ch LPCM 2ch LPCM 2ch LPCM 2ch LPCM
DTS 2ch Downmix 5.1ch
2ch Downmix
LPCM
DTS 5.1ch LPCM DTS
Jacks/
settings
Disc/source
49
Changing the Initial Settings
Language
Underlined items are the default settings.
Notes
•When you select a language in “Audio,” “Subtitles,” “BD/DVD Menu”
that is not recorded on the disc, one of the recorded languages is
automatically selected.
•Playback settings stored in the disc take priority over these settings.
OSD English
–Displays the menus and messages in English.
Français
–Displays the menus and messages in French.
–Select your language for the player on-screen
displays.
Audio English
–Plays the soundtrack in English.
French
–Plays the soundtrack in French.
Other
–See “Language Code List” on page 68 and enter the code for your language.
–Select the default soundtrack language for
BD-ROMs/DVD VIDEOs.
Subtitles English
–Displays the subtitles in English.
French
–Displays the subtitles in French.
Other
–See “Language Code List” on page 68 and enter the code for your language.
–Select the default subtitle language for BD-
ROMs/DVD VIDEOs.
BD/DVD Menu w/Subtitle
–Displays BD’s/DVD’s menus in the same language as the subtitle language.
English
–Displays BD’s/DVD’s menus in English.
French
–Displays BD’s/DVD’s menus in French.
Other
–See “Language Code List” on page 68 and enter the code for your language.
–Select the default menu language for BD-
ROMs/DVD VIDEOs.
Subtitle Display On
–Turns on the subtitles.
Off
–Turns off the subtitles.
50
Parental Control
This function limits playback of DVD VIDEOs and BD-ROMs.
To activate, see “Locking a Disc” (page29).
The default settings are underlined.
Notes
•You cannot limit playback if the disc does not have the Parental Control
function.
• If you forget the password for “Parental Control,” you will need to reset
the player (page 53). Note that all the settings you made also return to
their defaults.
Change Password (Set Password) Next Screen
–Set or change the password for the “Parental Control” function. You will be asked for
the password when playing restricted discs or when changing the control level.
DVD Parental Control Change Level
–Set the control level. The display asks for the password if the disc’s pre-determined
level exceeds the limit you set. The default setting is “Off
.”
DVD Country Code
–This ensures that you see the scenes intended for your residential area. The default
setting is “us
” (2119).
BD Parental Control Change Age Restriction
–Set the control level. The display asks for the password if the disc’s pre-determined
age restriction is higher than the age you set. The default setting is “255.”
BD Country Code
–This ensures that you see the scenes intended for your residential area when playing
BD-ROMs. The default setting is “us
” (2119).
51
Changing the Initial Settings
Speakers
The following items are necessary when using the 5.1CH
OUTPUT jacks.
The default settings are underlined.
Audio Output Mode 2 Channel
–Select this when connecting to an AV amplifier (receiver) using the AUDIO OUT (L/
R) jacks.
5.1 Channel
–Select this when connecting to an AV amplifier (receiver) using the 5.1CH OUTPUT
jacks.
–For analog connection.
Speaker Setup Next Screen
1Select the speaker setting that needs adjusting by pressing M/m.
•“C” (center speaker): “Yes” or “No”
•“Ls/Rs” (left surround speaker/right surround speaker): “Yes
” or “No”
•“L/R” (left front speaker/right front speaker): “Large
” or “Small”
2Adjust the setting by pressing </,.
•For “C” and “Ls/Rs,” select whether the speakers are included in your system.
•For “L/R,” select the size. This setting is disabled if either of “C” or “Ls/Rs” is set
to “No.”
3Press ENTER to save the adjustments.
–This setting affects the output from the
5.1CH OUTPUT jacks.
To Next Page
Loading...
