Sony SLV-400 - Remote Commander Preparation

Preparingthe RemoteCommander
2
3
Press • or • .to move the cursor to LANGUAGE.
Press EXECUTE.
The language menu screen appears.
4 Press < or • to select ENGLISH or FRENCH.
.=
m
i
=
€1
m
;Z
IB
11.
"u
"Ca
I:1
m
mm
UP
[]
c=
[]
[]
m
:l
Notes on the handling of batteries
• With normal use, the batteries should last for
•approximately six months.
• If you do not use the Remote Commander for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage.
• Do not use a new battery together with an old one.
Do not use different types of batteries.
_"J _.-__ ;F-_-F_ [_;]in]'_, [-_
i['-_ _ i[l_ • nl':.ln_ LI_{O]'_l_n[o] alLql'P,l aT'=ToI P-Iii_'k:,,) d,,,-,]|_li
You can set select your VCR to display screen information in
either English or French.
Select the menu language before using your VCR following
procedure.
1 Press MENU
The mainMENU appears.
5 Press EXECUTE.
Now that the menu language setting is over, the main MENU
appears in your selected language whenever you press
MENU.
You can control both the VCR and some Sony TVs with the
Remote Commander. You must set the TV/VTR remote
control selector to the "TV" or "VTR" position depending on
whether you want to control the VCR or the TV.
TV/V'rR remote
control selector
J
When controlling the VCR;
Set the TV/VTR remote control selector to the "VIR"
position.
When controlling a Sony TV
Setthe TV/V'IR remote controlselectorto the'"IV"
position.
The buttonsmarkedwitha smallyellowdot can beusedto
controlSonyTV setsbearingthe [] mark.
Preparation 17