To Next PageTo Next Page
Need help?Do you have a question about the Sony SLV-EX5 and is the answer not in the manual?
General| Type | VCR |
|---|---|
| Brand | Sony |
| Model | SLV-EX5 |
| Video Format | VHS |
| Hi-Fi Stereo | Yes |
| Heads | 4 |
| Remote Control | Yes |
| On-screen display | Yes |
| Clock/timer | Yes |
| Recording Speed | SP, LP, EP |
| Playback Speed | SP, LP, EP |
| Connections | RF |
| Inputs | composite video |
| Outputs | RF, composite video, audio |
Defines VHS system format, channel coverage, and antenna specifications.
Details audio and video input/output specifications for various models.
Lists technical specifications including format, channels, inputs/outputs, and power requirements.
Provides general specifications like power requirements, consumption, operating temperature, dimensions, and weight.
Step-by-step instructions for removing the upper case.
Instructions for disassembling the rear panel.
Procedure for removing the PSM17-501 board.
Steps to remove the front panel section.
Identifies the FE head and its part number.
Identifies tape sensors and top/end LED with part numbers.
Identifies capstan and cam motor assemblies with part numbers.
Location of MF-321, MA-377, and PSM17-501 boards.
Location of FJ-26, KK-24, and DS-92 boards.
Schematic showing the overall system block connections.
Explanation of symbols used in printed wiring diagrams.
Important notes for interpreting schematic diagrams.
Identifies safety-critical components and replacement guidelines.
Printed wiring diagram for the MA-377 board, part 1 of 7.
Schematic diagram for the MF-321 board.
Schematic diagram for the FJ-26 board.
Schematic diagram for the DS-92 board.
Schematic diagram for the KK-24 board.
Pin functions for the video block interface on MA-377 IC101.
Pin functions for servo peripheral circuits on MA-377 IC101.
List of error codes and their descriptions.
List of mode codes that appear in case of an error.
Reference to mechanical adjustment procedures.
Covers instruments, connections, set-up, tapes, and I/O for adjustments.
Procedure to adjust RF switching position for tape playback.
Checks and verifies power supply voltages.
Adjusts Hi-Fi audio and AF switching positions.
Checks overall audio level, distortion, and S/N.
Checks E-E output level and frequency response.
Reference to ACE head adjustment procedure.
Checks audio E-E output level and frequency response.
Adjusts audio signal separation into Lch and Rch.
Component layout diagrams for MA-377 and PSM17-501 boards.
List of parts for front panel and cabinet assemblies.
List of resistors used in the unit.
List of semiconductors used in the unit.
List of capacitors used in the unit.
Details on the RV701 variable resistor.
List of various switches used in the unit.
Details on the T371 transformer.
Details on the TU702 tuner.
List of vibrator components.
Details on the C501 capacitor.
Details on the CN501 connector.
Details on the IC501 integrated circuit.
Details on the BD1 diode.
Part for the main power shield case and lid.
List of screws, clips, and other hardware.
