Sony STR-AV970X - Adding Sound During Video Editing (STR-AV970 X)

AV ATe (Tol a (Tote) collate]
Adding New Sound on a Video Tape during Video Editing
During video tape editing, you can add the desired sound on the recording-side video tape from various audio program
SOUICES.
With the STR-AV970X
E Sa SR Fa
= Video signals :
= Audio signals
POWER — ON
6
DAT deck
1 Press VIDEO 2/LD.
2 Insert a recorded video tape into VCR 2 and set
the VCR to the playback mode.
3 At the point where audio dubbing is to start, press
the PAUSE button on VCR 2.
4 Press EDIT AUDIO.
EDIT
VIDEO |,
| AUDIO. CP!
AUDIO indicator appears.
5 Select the audio program source with FUNCTION
selectors.
ne
6 Release the pause mode of VCR 2 and set VCR 1
to the recording mode.
7 Start the selected audio program source.
Audio dubbing will start.
20