Sony STR-D2090 - Auto Tuning Stations

Receiving Broadcasts
Scanning Stations Automatically (Auto Tuning)
When you do not know the frequency of the station to be
received, proceed as follows.
te
A
Fe
Ed
a
ie
Frequency or the station index name you created is
displayed.
The FUNCTION buttons change to the numeric
buttons.
2 When the index name is displayed, press
DISPLAY INDEX to set to the FREQ mode.
DISPLAY
. The frequency appears on the display.
3 Select FM or AM.
20
4 Press INDEX SELECT/TUNING - or + until the
desired station is received..
INDEX SELECT/TUNING
For a lower For a higher
frequency frequency
When a station is received, automatic tuning stops.
If the automatic scan stops frequently (for FM reception
only)
You can receive only the strong stations by pressing
TUNING LEVEL. HIGH appears on the display.
To receive all receivable stations again
Press TUNING LEVEL so that HIGH goes off.