Sony STR-D2090 - Editing Video Sources; Video Tape Dubbing

=xelidiare Mr: MAce(zremerelelget=
Video Tape Dubbing
If the AUDIO indicator is lit in the display window, press the
EDIT AUDIO button to make the indicator go out.
= Video signals
POWER — ON
to VIDEO 1 VIDEO
toVIDEO2
=
floytjauDio
ouT
BI
VIDEO
IN/
toVIDEO3 &
VIDEO IN/
TVtunerNCRS | 3
1 Select the playback VCR with EDIT VIDEO.
To select VCR 2, press EDIT VIDEO so that "2> 1"
appears on the display.
To select VCR 3, press EDIT VIDEO so that "3c 1"
appears on the display.
2 Press VIDEO 2 or VIDEO 3 to select the video
signal to monitor on the monitor TV according to
the VCR to be played.
VIDEO 2: for the VCR 2
VIDEO 3: for the VCR 3
3 Set the playback VCR to the playback mode.
4 Set the VCR 1 to the recording mode.
Dubbing will start.
— Video Tape Editing —
To switch the playback VCR during dubbing
Press EDIT VIDEO. Each time you press the button, the
playback VCR switches from the VCR 2 to the VCR 3 (or the
VCR 3 to the VCR 2).
To view the other video source(s) on the monitor TV
during dubbing
Press the appropriate function selector, VIDEO 1, VIDEO 2,
or VIDEO 3.
To listen to an audio program during video tape dubbing
1 Press the appropriate function selector.
2 Start the selected audio program source.
27