Sony STR-D2090 - Specifications; Audio Power Specifications; Digital Signal Processor Specifications

Specifications
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION
With 8-ohm load, both channels driven,
from 20 - 20,000 Hz, rated 120 watts per
channel minimum RMS power, with no
more than 0.04 % total harmonic
distortion from 250 milliwatts to rated
output.
"7 Slereornode.
75 W+75W 120 W + 120 W
ae
*' (only in the DOLBY, THEATER and LIVE modes)
Other Specifications
185 + 185 watts
_ [235 + 235 watts
_ | |RIAA equalization curve 0.5
1dB
110 Hz— 20 kHz *°.B
4 mV, 50 kilohms
85 dB*?(A,150mV)
*2°78IHF
46
‘SPE S | Accepts speakers of 8-16 ohms
‘| HEAD HONES| Accepts headphones of high
Boe =< |and low impedance
SURROUND | 1V, 1 kilohm
- JOUTREAR
| SURROUND -
-11V, 1kilohm
| OUT CENTER
|SURROUND. |1 V, tkilohm
- |OUT MONO.
+10 dB at 70Hz
Digital signa! processor section
| Demonstration (D/A conversion) .
ee) (Pulse D/A Converter)
_ | 3-band, Bass/treble Mid
Modulation (A/D conversion) °
| Bass: 125 Hz — 1 kHz
Treble: 1 kHz — 8 kHz
| Turnover
| frequency
Center| Mid: 54 —8 kHz
frequency
{+10 GB, 1 GB step
3-step selectable, Wide, Mid,
>| Narrow
6-step adjustable
-) 16-step adjustable
a 16-step adjustable
16-step adjustable
| 20-step adjustable
AE| 16-step adjustable
3115.0 ms-30. ms, 0.1 ms step
+10 —-50 dB, 1 dB step
+10 —-50 dB, 1 cB step
Automatic
*3 (only in the DOLBY mode)
*4(only in the DOLBY, THEATER and LIVE modes)