To Next PageTo Next Page
What does PROTECTOR mean on my Sony Receiver?
If you see “PROTECTOR” displayed, it might be because the receiver is covered and ventilation holes are blocked. Remove the object covering the upper panel of the receiver and turn on the power again.
How to stop my Sony Receiver from turning off automatically?
Your Sony Receiver might be turning off automatically due to a few reasons: * “Auto Standby” is set to “On”. To resolve this, set Auto Standby to Off. * The sleep timer function is active. * “PROTECTOR” is activated.
How to fix unbalanced sound on Sony STR-DA3700ES Receiver?
If the left and right sounds are unbalanced or reversed on your Sony Receiver: * Check that the speakers and equipment are connected correctly. * Adjust the balance parameters using the “Speaker Setup” in the Speaker Settings menu. * Adjust the level of the speakers.
Why does my Sony STR-DA3700ES Receiver turn on automatically?
Your Sony Receiver might be turning on automatically because “Control for HDMI” is set to “On” or “Pass Through” is set to “Off.”
Why does my Sony STR-DA3700ES Receiver turn off automatically?
Your Sony Receiver might be turning off automatically because the “Auto Standby” feature is set to “On”. To prevent this, set Auto Standby to Off. Alternatively, the sleep timer function may be active, or the “PROTECTOR” function might be enabled.
What to do if my Sony STR-DA3700ES shows 'PROTECTOR'?
If your Sony Receiver displays 'PROTECTOR', it indicates a protective mode has been activated. This can happen if the receiver's ventilation holes are blocked. Remove any objects covering the upper panel of the receiver and turn the power on again.
Why is my Sony Receiver hot on the top?
The top of the Sony Receiver may get hot due to the amplifier's normal operation. This is not a malfunction.
How to fix unbalanced left and right sounds on Sony STR-DA3700ES?
If the left and right sounds are unbalanced or reversed on your Sony Receiver, check the following: - Ensure that the speakers and equipment are connected correctly. - Adjust the balance parameters using the “Speaker Setup” in the Speaker Settings menu. - Adjust the level of the speakers.
Why is my Sony STR-DA3700ES Receiver remote control not working?
If your Sony Receiver remote control isn't working, try these steps: * Point the remote control directly at the remote sensor on the receiver. * Ensure there are no obstacles blocking the path between the remote control and the receiver. * Replace the batteries in the remote control with new ones. * Make sure the command modes of the receiver and the remote control are the same. * Verify that you've selected the correct input on the remote control.
Why is there no sound from specific speakers on my Sony STR-DA3700ES Receiver?
If there's no sound from specific speakers on your Sony Receiver, try the following: * Connect headphones to the PHONES jack to verify that sound is output to the headphones. * If only one channel is output to the headphones, check that all the cords are fully inserted into the jacks on both the receiver and the equipment. * If both channels are output to the headphones, check the connection of the front speaker which is not outputting any sound. * Make sure you have connected both the L and R jacks to an monaural equipment, analog equipment requires both L and R jack connections. * Use a monaural-stereo cable (not supplied). However, there will be no sound from the center speaker when a sound field (Pro Logic, etc.) is selected.
Identification and explanation of controls on the receiver's front panel.
Identification and explanation of input/output jacks on the receiver's rear panel.
Overview of buttons and functions on the supplied remote control.
How to connect the TV to the receiver via HDMI or other video connections.
Steps for connecting audio sources like CD players or tape decks.
Guidance on connecting the receiver to a home network for internet access.
Initial steps for setting up the receiver and remote control.
Configuration options for speaker setup, including auto calibration.
Options for customizing audio playback, like sound optimizer and equalizer.
Settings related to HDMI connections, including Control for HDMI and Pass Through.
Common issues like automatic power off or unexpected turn-on.
Problems related to picture display, such as no image or poor quality.
Issues with sound output, including no sound or hum/noise.
Identification and explanation of controls on the receiver's front panel.
Identification and explanation of input/output jacks on the receiver's rear panel.
Overview of buttons and functions on the supplied remote control.
How to connect the TV to the receiver via HDMI or other video connections.
Steps for connecting audio sources like CD players or tape decks.
Guidance on connecting the receiver to a home network for internet access.
Initial steps for setting up the receiver and remote control.
Configuration options for speaker setup, including auto calibration.
Options for customizing audio playback, like sound optimizer and equalizer.
Settings related to HDMI connections, including Control for HDMI and Pass Through.
Common issues like automatic power off or unexpected turn-on.
Problems related to picture display, such as no image or poor quality.
Issues with sound output, including no sound or hum/noise.
General| Display | - |
|---|---|
| Product color | Black |
| Audio decoders | Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS 96/24, DTS-ES, DTS-HD |
| x.v.Color support | Yes |
| Apple docking compatibility | Not supported |
| Output impedance | 8 Ω |
| Audio output channels | 7.2 channels |
| Audio A/D Converter (ADC) | 24-bit/96kHz |
| Total Harmonic Distortion (THD) | 1 % |
| Power output per channel (20-20KHz@8 Ohm) | 125 W |
| HDMI in | 5 |
| S-Video inputs quantity | 1 |
| Ethernet LAN (RJ-45) ports | 4 |
| Component video (YPbPr/YCbCr) in | 2 |
| Connectivity technology | Wired |
| Audio formats supported | AAC, FLAC, LPCM, MP3, WMA |
| Image formats supported | JPG |
| Video formats supported | AVCHD, MPEG1, MPEG2, MPEG4, TS, WMV9, XVID |
| Wi-Fi | No |
| Supported radio bands | AM, FM |
Weight and Dimensions| Depth | 16 mm |
|---|---|
| Width | 430 mm |
| Height | 388 mm |
