Sony STR-DB840 User Manual

Hooking Up
Setting Up
the Speaker
‘f’his chapter describes how to hook
up your speaker system to the
receiver, how to position each speaker,
and hog to set up your speakers to
enjoy multi channel surround sound.
SET UP Cursor buttons
Jog‘dial
Brief descriptions of buttons and control
used to set up the speaker system
SET UP button: Press to enter the setup mode when
specifying speaker types and distances
Cursor buttons (</>): Use to select parameters after
pressing the SET UP button
Jog dial: Use to adjust the setting of each parameter
15

Sony STR-DB840 Specifications

General

Digital inputs	2 Optical, 1 Coaxial
Power output	100 watts per channel into 8Ω (stereo)
Frequency response	10Hz to 100kHz
Total harmonic distortion	0.09%
Input sensitivity	2.5mV (MM), 200mV (line)
Speaker load impedance	8 ohms
Dimensions	430 x 157mm
Tuning range	FM, MW
Video Connections	composite