Adjustments Using the SET UP Button
Select the color system of your TV monitor You can select
either NTSC or PAL The default setting is PAL
1 Press SET Up.
2 Press the cursor buttons (< or >) to select
“COLOR SYSTEM”
3 Turn the jog dial to select “NTSC” or “PAL”
Select the color of the on-screen display You can
select either COLOR or MONOCHROME The color of the
on-screen display is set to COLOR by default
1 Press SET UP.
2 Press the cursor buttons (< or >) to select “OSD
COLOR”
3 Turn the jog dial to select “COLOR” or
“MONOCHROME”
This parameter lets you specify whether or not the display
turns off when you press the DIMMER button several
times When “WIDE” is selected, you can set the display
to turn off, but when “NARROW” is selected, you cannot
set the display to turn off The default setting is set to
“NARROW”
1 Press SET UP.
2 Press the cursor buttons (< or >) to select “DIMM
RANGE”
3 Turn the jog dial to select “NARROW” or “WIDE”
CONTROL Al II Control
System
This section explains the basic functions of the
CONTROL Al II Control System Certain components
have special functions, like “CD Synchro Dubbing” on
cassette decks, that require CONTROL Al11
connections For detailed information regarding
specific operations, be sure to also refer to the
Operating Instructions supplied with your
component(s)
The CONTROL Al11 Control System was designed to
simplify the operation of audio systems composed of
separate Sony components CONTROL Al II connections
provide a path for the transmission of control signals
which enable automatic operation and control features
usually associated with integrated systems
Currently, CONTROL Al11 connections between a Sony
CD player, amplifier (receiver), MD deck and cassette
deck provide automatic function selection and
synchronized recording
In the future the CONTROL Al II connection will work as
a multifunction bus allowing you to control various
functions for each component
Notes
l
The CONTROL
Al
II Control System is designed to maintain
upward compatibility
as the Control System is upgraded to
handle new functions In this case, however, older components
will not be compatible with the new functions
l
Do not operate a 2 way remote control unit when the
CONTROL Al II jacks are connected via a PC interface kit to a
personal computer running “MD Editor” or similar application
Also, do not operate the connected component in a manner
contrary to the functions of the application, as this may cause
the application to operate incorrectly
CONTROL Al
II
and CONTROL Al compatibility
The CONTROL Al control system has been updated to the
CONTROL Al II which is the standard system in the SONY
300 disc CD changer and other recent Sony components
Components with CONTROL Al jacks are compatible with
components with CONTROL Al II, and can be connected to
each other Basically, the majority of the functions available
with the CONTROL Al control system will be available with
the CONTROL Al II control system
However, when making connections between components
with CONTROL Al jacks and components with CONTROL
Al11 jacks, the number of functions that can be controlled
may be limited depending on the component For detailed
information, refer to the Operating Instructions supplied with
the component(s)
54
To Next Page
Loading...
Need help?
General
