Sony STR-DB840 User Manual

Parts Description
Open up the cover
q D TUNING ENTER button
If you have selected tuner:
Press to enter Direct Tuning mode For details on
Direct Tuning procedure, refer to the Operating
Instructions supplied with your receiver
If you have selected VCR, DVD player, LD player,
TV, cable box, satellite tuner, tape deck, MD deck,
CD player, or DAT deck:
After selecting a channel, disc, or track using the
numeric buttons, press this button to enter the
selection For details, refer to the Operating
Instructions supplied with your receiver
q SHIFT >I0 -I- button
If you have selected tuner:
Press repeatedly to select a memory page for
presetting radio stations or tuning to preset stations
If you selected VCR, TV, tape deck, LD player, video
CD player, MD deck, or CD player:
Press before inputting a channel, disc, or track number
of eleven or higher
For details, refer to the operation
manual supplied with the respective components
q Numeric buttons (1 to 0)
Inputs the correponding numeric value
On some
components, pressing 0 selects 10 For details, refer to
the operation manual supplied with the respective
components
8

Sony STR-DB840 Specifications

General

Digital inputs	2 Optical, 1 Coaxial
Power output	100 watts per channel into 8Ω (stereo)
Frequency response	10Hz to 100kHz
Total harmonic distortion	0.09%
Input sensitivity	2.5mV (MM), 200mV (line)
Speaker load impedance	8 ohms
Dimensions	430 x 157mm
Tuning range	FM, MW
Video Connections	composite