Specifications (continued)
AM tuner section
Tuning range
With IO-kHz tuning scale: 530 - 1.710 kHz4’
With 9-kHz tuning scale: 531 - 1.710 kHz+
Antenna Loop antenna
Usable sensitivity
50 dB/m (at 1,000 kHz or
999 kHz)
SIN
54 dB (at 50 mV/m)
Harmonic distortion 0.5 % (50 mV/m,
400 kHz)
Selectivity
At 9 kHz:
At 10 kHz:
35 dB
40 dB
4) You can change the AM tuning scale to 9 kHz or
10 Wz. After tuning in any AM station, turn off
the receiver. Hold down PRESET TUNING + and
press I/(!.). All preset stations will be erased when
you change the tuning scale. To reset the scale to
10 kHz (or 9 Wz), repeat the procedure.
Video section
Inputs
Video:
S-video:
outputs
Video:
S-video:
General
Power requirements
Power consumption
AC outlets
2 switched, 120 W/IA
Dimensions
430 x 161 x 401 mm
including projecting parts
and controls
Mass (Approx.)
1 Vp-p, 75 ohms
Y: 1 vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
1 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
120 V AC, 60 Hz
Models of area code U:
300 w
Models of area code CA:
375 VA
16.0 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Audio/video/control S connecting cord (1)
Control S connecting cord (1)
Remote commander RMPP505L (1)
R6 (size-AA) batteries (2)
Design and specifications are subject to change
without notice.
48