20
GB
Hooking Up and Setting Up the Speaker System
There’s no sound from a specific component.
, Check that the component is connected cor rectly to
the audio input jacks for that component.
, Check that the cor d(s) used for the connection is
(ar e) fully inser ted into the jacks on both the
receiver and the component.
No sound is heard from one of the front
speakers.
, Connect a pair of headphones to the PHONES jack
to verify that sound is output fr om the headphones
(see “ w; PHONES jack” on page 23).
If only one channel is output fr om the headphones,
the component may not be connected to the
receiver cor rectly . Check that all the cor ds ar e fully
inser ted into the jacks on both the r eceiver and the
component.
If both channels ar e output fr om the headphones,
the fr ont speaker may not be connected to the
receiver cor rectly . Check the connection of the fr ont
speaker which is not outputting any sound.
If you encounter a pr oblem that is not included above, see
“Troubleshooting” on page 42.
Before You Use Your Receiver
To Next Page
Loading...
