Notes
• Refer to the operating
instructions supplied with tile
TV and DVD ph_yer.
• Check the following if you
cmmot listen to multi chmmel
suuud.
Be sure the :mdiu source
corresponds to the multi
channel format.
Be sure this receiver is
connected to the DVD ph_yer
via :l digital com]ection.
Be sure the digit:d :radio
output of the DVD player is
set up properly.
Tips
• Select the sound l'urmat of the
disc to be played, if necessary.
• You can select the sound field to
suit the muvie/umsic. Refer to
page 54 fur details.
Recommended sound fields:
Movie: C. ST. EX
Music: CONCERT
1 Turn on the TV and DVD player.
2 Turn on the receiver.
3 Press DVD.
You can also use INPUT SELECTOR on the receiver to
select "DVD".
4 Switch the input of the TV so that an image
of the DVD is displayed.
5 Set up the DVD player.
Refer to "Quick Setup Guide" supplied with the receiver.
6 Playback the disc.
7 Adjust to a suitable volume.
8 After you have finished watching the DVD,
eject the disc and turn off the receiver, TV
and DVD player.
38 us
To Next Page
Loading...
