Sony STR-DG810 - Equalizer and Surround Sound Settings; Equalizer (EQ) Menu; Surround Sound Field Selection

Adjustingtheequalizer
(EQmenu)
You can use the EQ menu to adjust the tonal
quality (bass/treble level) of the front
speakers.
Select "2-EQ" in the amplifier menus. For
details on adjusting the parameters, see
"Navigating through menus" (page 39) and
"Overview of the menus" (page 40).
EQ menu parameters
• EQ (Equalizer on/off)
Lets you turn tile equalizer oil or oft'.
• EQ ON
The equalizer is turned on.
• EQ OFF
The equalizer is turned off.
• BASS LVL (Front speaker bass
level)*
• TRE LVL (Front speaker treble
level)*
: You can a([just the front speaker bass and treble
level v,'ith TONE MODE and TONE +/ on tile
receiver.
Settingsforthe surround
sound
(SURmenu)
You can use the SUR menu to select the sound
field you want tbr your listening pleasure.
Select "3-SUR" in the amplifier menus. For
details on adjusting the parameters, see
"Navigating through menus" (page 39) and
"Overview of the menus" (page 40).
SUR menu parameters
• S.F. SELCT (Sound field
selection)
Lets you select the sound field you want. For
details, see "Enjoying Surround Sound" (page
52).
Note
The receiver lets you apply the last selected sound
field to an input whenever it is selected (Sound Field
Link). For example, if you select HALL for the
SA_CD/CD/CD-R input, then change to a different
input and then return to SA_CD/CD/CD_R, HALL
will automatically be applied again.
• SB DEC (Surround back
decoding mode)
Lets you select the surround back decoding
mode. For details, see "Using the surround
back decoding mode" (page 45).
• EFFECT (Effect level)
Lets you adjust the "presence" of the surround
effect for sound fieMs selected with the
MOVIE or MUSIC buttons and for "HP
THEA" sound field.
• EFCT. MIN
The surround effect is minimum.
• EFCT. STD
The surround effect is standard.
• EFCT. MAX
The surround effect is maxinmm.
44us