Sony STR-DG810 - Switching Audio Input Modes; Input Mode Selection Guide; Input Mode Notes and Limitations

Switchingthe audio input
mode
(INPUT MODE)
You can select the audio input mode by setting
the audio input mode when you connect
components to both digital and analog audio
input jacks on the receiver.
1 Turn INPUT SELECTOR on the
receiver to select the input.
You can also use tile input bnttons on tile
remote.
2 Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
Tile selected audio input mode appears on
the display.
Audio input modes
• AUTO IN
Gives priority to digital audio signals when
there are both digital and analog
connections. If there are no digital audio
signals, analog audio signals are selected.
• HDMI IN
Specifies the digital audio signals input to
the HDMI jack.
• COAX IN
Specifies the digital audio signals input to
the DIGITAL COAXIAL jack.
• OPT IN
Specifies the digital audio signals input to
the DIGITAL OPTICAL jack.
• ANALOG
Specifies the analog audio signals input to
the AUDIO IN (L/R)jacks.
Notes
• Some audio ininlt modes may not be set up
depending on the input.
• When the ANALOG DIRECT fimctinn is selected,
audio input is set to "ANALOG" automatically and
yOU cannot select other nlodes.
0
71us