Why is there no picture from my Sony STR-DH700?
If there's no picture or an unclear picture on the TV screen connected to your Sony Receiver, select the correct input using the input buttons and set your TV to the appropriate input mode. Also, move your audio components away from the TV. Note that depending on the DIGITAL MEDIA PORT adapter, video output may not be possible.
Why is there no sound from digital sources on my Sony Receiver?
If there is no sound from digital sources (COAXIAL or OPTICAL input jack) on your Sony Receiver, make sure the INPUT MODE is not set to “ANALOG” and ANALOG DIRECT is not set to on. Also, check that the selected digital audio input jack is not assigned to other inputs using the DIGITAL ASSIGN function.
Why is Control for HDMI not working on my Sony Receiver?
If the control for HDMI function is not working on your Sony Receiver, check the HDMI connection. Make sure “CONTROL FOR HDMI” is set to “CTRL ON” in the HDMI menu and that the connected component is compatible with the Control for HDMI function. Check the Control for HDMI settings on the connected component, referring to its operating instructions. If you change the HDMI connection, connect/disconnect the AC power cord, or experience a power failure, repeat the procedures for “Preparing for the “BRAVIA” Sync”.
Why is there no sound from DIGITAL MEDIA PORT adapter on Sony STR-DH700?
If there is no sound from the component connected to the DIGITAL MEDIA PORT adapter on your Sony Receiver, adjust the receiver's volume. If that doesn't work, turn off the receiver and reconnect the DIGITAL MEDIA PORT adapter and/or component. Also, ensure the DIGITAL MEDIA PORT adapter and/or component device supports this receiver.
Why is there no sound from System Audio Control on my Sony STR-DH700?
If no sound is output from the receiver and TV speaker while using the System Audio Control function on your Sony Receiver, ensure that the TV is compatible with the System Audio Control function. If the TV lacks this function, adjust the “AUDIO FOR HDMI” settings in the HDMI menu: choose “TV+AMP” to listen through both TV speakers and the receiver, or “AMP” to listen only through the receiver. If you can't hear a component connected to the receiver, select the appropriate input on the receiver, change the TV channel for TV broadcasts, or select the correct component/input on the TV, referring to the TV's operating instructions.
Why is sound transmission not established on my Sony STR-DH700 Receiver?
If you are experiencing sound transmission issues with your Sony Receiver, and you are using another S-AIR main unit, ensure it is more than 8 meters away. Confirm the IDs of the S-AIR main unit and sub unit. If you paired the S-AIR main unit with another S-AIR sub unit, perform pairing with the desired S-AIR sub unit. If the S-AIR main unit is pairing with another S-AIR sub unit, cancel the pairing. Install the S-AIR main unit and sub unit away from other wireless products. Stop using other wireless products. Ensure the S-AIR sub unit is turned on and connected to the AC power cord.
General| Equalizer | Yes |
|---|---|
| Product color | Black |
| Audio decoders | dts, dts 96/24, dts NEO:6, dts-ES |
| Impedance | 8 Ω |
| RMS rated power | 735 W |
| Audio output channels | 7.1 channels |
| Total Harmonic Distortion (THD) | 1 % |
| Supported radio bands | AM, FM |
| Headphone outputs | 1 |
| Dimensions (WxDxH) | 430 x 157.5 x 322 mm |
| Power requirements | 120 V, 60 Hz |
| HDMI ports quantity | 4 |
| I/O ports | 2 x Anten. 1 x Coax. - in 3 x Compon. - in 1 x Compon. - out 4 x Compos. - in 1 x Compos. - out 1 x DM 3 x HD Compon. - in 1 x HD Compon. - out 3 x HDMI - in 1 x HDMI - out 2 x Opt. - in 1 x Sub. - out |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 240 W |
Weight and Dimensions| Weight | 8000 g |
|---|
Critical safety warnings for fire and electric shock prevention.
Mandatory safety instructions for appliance usage and maintenance.
Advisories on unauthorized modifications and potential hazards.
Identification and function of buttons and indicators on the front panel.
Details on S-AIR, DMPORT, Antenna, Digital, HDMI, and Speaker connections.
Functions for TV, AV components, input selection, and sound fields.
Guide to installing 5.1 and 7.1 channel speaker systems.
Diagram and instructions for connecting speakers to the receiver terminals.
Diagram showing connections for video components.
Instructions for connecting video and audio signals to a TV.
Connecting Super Audio CD player, CD player, or CD recorder.
Table and guide for connecting various video components.
Diagrams for connecting satellite tuners, DVD players, and Blu-ray players via HDMI.
Instructions for connecting satellite tuners/set-top boxes via component video and digital audio.
Steps to initialize the receiver and return settings to factory defaults.
Procedure to select the active front speaker system (SP A or SP B).
Steps for connecting the optimizer microphone and setting up for calibration.
Details on measurement stages, display indicators, and completion of auto calibration.
List of error codes, their causes, and recommended solutions for calibration issues.
List of warning codes providing measurement results and suggested actions.
Procedure to play test tones and adjust speaker levels for optimal balance.
Detailed explanation of T. TONE, FRT BAL, CNT LVL, SL LVL, SR LVL, SB LVL, SBL LVL, SBR LVL, SW LVL, and D. RANGE.
Explanation of SB OFF, SB AUTO, and SB ON modes for surround back signals.
Using Auto Format Direct (A.F.D.) mode for multi-channel sound.
Choosing sound fields for movies or music to enhance listening experience.
Procedure to preset up to 30 FM and 30 AM stations for quick tuning.
Information on SIRIUS Satellite Radio service, subscription, and packages.
Setting up parental lock using a 4-digit lock code.
Explanation of BRAVIA Sync compatibility and its simplified operations.
Guidelines for handling the receiver safely, including power sources and heat.
Information on power voltage, AC power disconnection, and heat dissipation.
Diagnosing and resolving issues with no sound or low sound from speakers or components.
Troubleshooting no sound from specific speakers or components.
Technical details on power output, distortion, and amplifier section.
To Next Page
