Sony STR-DH770 - 1 About Auto

[34] Preparation 6. Setting up the receiver using Easy Setup
Selecting the language
You can select the language of messages on the screen.
Note
When the Control for HDMI function on both the receiver and the TV (BRAVIA TV) is turned on, the
on-screen display language of the receiver is changed simultaneously when you change the
language for the on-screen display of the TV.
[35] Preparation 6. Setting up the receiver using Easy Setup
Assigning the surround back speaker terminals
(Surround Back Speakers Assign)
You can set the assignment for the SPEAKERS SURROUND BACK/BI-AMP/FRONT
HIGH/FRONT B terminals.
Note
You can only set [Surround Back Speakers Assign] when headphones are not connected.
Hint
You can also set the assignment for the surround back speaker terminals from [SB ASSIGN] in the
[<SPEAKER>] menu on the display panel.
[36] Preparation Performing Auto Calibration
1. About Auto Calibration
Select [Easy Setup] from the home menu.
1
Select the language you want.
2
Select [Speaker Setting] from the home menu.
1
Select [Surround Back Speakers Assign].
2
Set the assignment for the SPEAKERS SURROUND BACK/BI-AMP/FRONT
HIGH/FRONT B terminals.
Surround Back Speakers: When using the surround back speaker connection.
Bi-Amplifier Speakers: When using the bi-amplifier speaker connection.
Front B Speakers: When using the front B speaker connection.
Front High Speakers: When using the front high speaker connection.
None Speaker: When none of the connections above is used.
3