Note
The above explanations are intended to serve as examples.
Depending on the model of your connected device, some functions explained in this section may not
work with the supplied remote control.
[8] Preparation 1. Installing speakers
Names and functions of speakers
Location of each speaker
AMP MENU
Displays the menu on the display panel to operate the receiver.
1.
, / / /
Press / / / to select the menu items. Then press to enter the selection.
2.
PAIRING
Sets the receiver to the BLUETOOTH pairing mode.
3.
HOME
Displays the home menu on the TV screen.
4.
/ , (*),
Skip, play, pause, stop operation.
When [FM] is selected as the input, press and hold
/ to scan stations automatically.
Press
to change to the direct tuning mode.
PRESET+/–
Select preset stations or channels.
MEMORY (*)
Stores a station during tuner operation.
5.
+ (*)/–
Adjust the volume level of all speakers at the same time.
6.
DISPLAY
Displays information on the display panel.
7.
BACK
Returns to the previous menu or exits a menu or on-screen guide that is displayed on the
TV screen.
8.
Turns off the sound temporarily. Press the button again to restore the sound.
9.
The /MEMORY and + buttons have tactile dots. Use the tactile dots as a reference when operating the
receiver.
*
To Next Page
Loading...
