Note
Before you turn off the receiver, be sure to turn down the volume level to avoid damaging your
speakers.
Hint
You can turn INPUT SELECTOR on the receiver or press the input buttons on the remote control to
select the device you want.
You can adjust the volume differently using the MASTER VOLUME knob on the receiver or the
+/– buttons on the remote control.
To turn the volume up or down quickly
Turn the knob quickly.
Press and hold one of the buttons.
To make fine adjustments
Turn the knob slowly.
Press one of the buttons and release it immediately.
[45] Enjoying Video and Sound Playing AV devices
Enjoying sound of an ARC (Audio Return Channel)
compatible TV
If the receiver is connected to a TV's HDMI input jack compatible with Audio Return Channel
(ARC), you can listen to TV sound from the speakers connected to the receiver without
connecting an optical digital cable or an audio cable. Set the receiver by the following
procedure to output the sound of the TV from the speakers connected to the receiver.
This operation is only available using the display panel on the front of the receiver.
The home menu is displayed on the TV screen.
Depending on the TV, the home menu may take some time to appear on the TV screen.
Select [Watch] or [Listen] from the home menu.
The menu item list appears on the TV screen.
3
Select the device you want to play.
4
Turn on the device and start playback.
5
Press
+/– to adjust the volume.
You can also use MASTER VOLUME on the receiver.
6
To Next Page
Loading...
