Sony STR-DH770 - Selecting a Sound Field

repeatedly.
[57] Enjoying Video and Sound Enjoying sound effects
Selecting a sound field
You can select from a variety of sound field modes according to speaker connections or input
sources.
Note
When listening with headphones, only the sound field for headphones appear.
The sound fields for movie and music may not work, depending on the input or the speaker pattern
you select, or with audio formats.
The receiver may play signals at a lower sampling frequency than the actual sampling frequency of
the input signals, depending on the audio format.
[PLIIX MV] or [PLIIX MS] may not appear, depending on the speaker pattern you select.
Some speakers or the subwoofer may not output sound, depending on the sound field setting.
[58] Enjoying Video and Sound Enjoying sound effects
Relations between sound fields and speaker outputs
The list below shows which speaker outputs sound when a certain sound field is selected.
Note
When no sound is heard, check that all the speakers are securely connected to the correct speaker
terminals, and the correct speaker pattern is selected.
2-channel content
Press FRONT SURROUND, 2CH/MULTI, MOVIE, or MUSIC to select a sound field you
want.
You can also use 2CH/MULTI, MOVIE, or MUSIC on the receiver.
1
Sound field Display panel
Front
speakers
Center
speaker
Surround
speakers
Surround
back
speakers
Subwoofer
Front
high
speakers
2CH/MULTI
2ch Stereo 2CH STEREO
◎
- - - - -
Multi Channel Stereo MULTI ST.
◎
○ ○ ○ ○ ○
Direct (Analog input) DIRECT
◎
- - - - -
Direct (Others) DIRECT
◎
- - - ○ (*1) -
MOVIE
HD-D.C.S.
(Dynamic/Theater/Studio)
HD-D.C.S.
◎
○ ○ ○ ○ ○
PLII Movie PLII MV
◎
○ ○ - ○ -
PLIIx Movie PLIIX MV
◎
○ ○ ○ ○ -
Neo:6 Cinema NEO6.CINEMA
◎
○ ○ ○ ○ (*2) -