Only audio signals from [USB], [Bluetooth] (only when in BLUETOOTH RX mode), [Home
Network], [Music Services], [FM TUNER] and audio signals input from AUDIO IN jacks
are output to the Zone 2 speakers.
External digital input from OPTICAL IN, COAXIAL IN, HDMI IN jacks and Screen mirroring
cannot be output to Zone 2.
[110] Using the Multi-Zone Features (for STR-DN1060 only)
Enjoying sound from
speakers located in other rooms using another amplifier (for STR-DN1060 only)
2. Setting the volume control for Zone 2 (Zone2 Line
Out) (for STR-DN1060 only)
You can set variable or fixed volume control for the ZONE 2 AUDIO OUT jacks.
1. Select [Setup] - [Zone Settings] from the home menu.
2. Select [Zone2 Line Out].
3. Select the setting you want.
Variable:
Recommended when using another amplifier that does not have volume control for
Zone 2.
The volume for the ZONE 2 AUDIO OUT jacks can be changed.
Fixed:
Recommended when using another amplifier with variable volume control for Zone
2. The volume for the ZONE 2 AUDIO OUT jacks is fixed.
Note
When [Variable] is set, the volume is turned down by default. Turn up the volume while
listening to the sound after completing setup. The volume for the SPEAKERS
SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B/ZONE 2 terminals is changed
together with the volume for the ZONE 2 AUDIO OUT jacks.
[111] Using the Multi-Zone Features (for STR-DN1060 only)
Enjoying sound from
speakers located in other rooms using another amplifier (for STR-DN1060 only)
3. Enjoying sound using another amplifier in Zone 2 (for
To Next Page
