4-6
BVM-A14
4. MATRIX adjustment (2)
Adjustment Operation Standard Adjusting Point
Step 1
. Input the 1080/60i 8-color bar signal 100% WHITE level and the 100 IRE pulse level output The adjustment menu is
(saturation: 100%) to the BKM-68X from TP121 (RED) are equal: PR R GAIN
(analog component input adaptor). Level difference: 0 ± 4 mV in SYSTEM CONFIGURATION →
. Set FORMAT in the INPUT MAINTENANCE → VIDEO (2/5).
CONFIGURATION menu to RGB.
. Connect the oscilloscope to TP121
(RED).
Step 2
. Connect the oscilloscope to TP321 100% WHITE level and the 100 IRE pulse level output The adjustment menu is
(GREEN). from TP321 (GREEN) are equal: Y G GAIN
Level difference: 0 ± 4 mV in SYSTEM CONFIGURATION →
MAINTENANCE → VIDEO (2/5).
Step 3
. Connect the oscilloscope to TP521 100% WHITE level and the 100 IRE pulse level output The adjustment menu is
(BLUE). from TP521 (BLUE) are equal: PB B GAIN
Level difference: 0 ± 4 mV in SYSTEM CONFIGURATION →
MAINTENANCE → VIDEO (2/5).
Make them equal.
Make them equal.
Make them equal.
To Next Page
Loading...
