Sony TRINITRON BVM-A20F1U - [I] Setting Key Protect - KEY PROTECT Menu; Overview; Setting Lists in the KEY PROTECT Menu

55
[I] Setting Key Protect – KEY PROTECT Menu
Chapter 2 Menu
The usable symbols are “(”, “)”, “.”, “–”, “+”, “/
”, “%”, “*”, “#”, “_”, “$” and “(space)” (12
symbols).
NAME menu: Set the information for the
administration (device ID).
NEW NAME: Enter a new name (up to 20
characters).
The usable symbols are “(", “)”, “.”, “
–”, “+”, “/
”, “%”, “*”, “#”, “_”, “$” and “(space)” (12
symbols).
LOCATION menu: Set the location information.
NEW NAME: Enter a new name (up to 20
characters).
The usable symbols are “(”, “)”, “.”, “
–”, “+”, “/
”, “%”, “*”, “#”, “_”, “$” and “(space)” (12
symbols).
TRAP menu: Set the address to send the information.
TRAP1 and TRAP2 are set.
TRAP1: Set the IP address (default setting is
“000.000.000.000”).
TRAP2: Set the IP address (default setting is
“000.000.000.000”).
CANCEL: Select to cancel the changed or
confirmed setting.
CONFIRM: Select to save the changed or
confirmed setting.
[I] Setting Key Protect
– KEY PROTECT Menu
Overview
The data is locked so that they cannot be changed by an
unauthorized user.
Setting Lists in the KEY PROTECT
Menu
This section explains the setting lists displayed in the
menu.
How to read the setting lists
• For purposes of explanation, each setting list is preceded
by a menu number. These numbers are not displayed on
the screen.
For more information on the menu number, see “About
menu numbers” on page 26.
The arrow mark (k ) refers you to another setting list that
appears after you make the setting, or to an operation that
is to be carried out as a result of the setting.
[I] KEY PROTECT menu
ON: The button on the controller (except the menu
operation buttons and monitor select buttons) does
not function and other settings are not changeable.
OFF: Release the lock.