Sony Trinitron KV-13VM20 - Page 14

Presetting TV Channels
Press RETURN.
The SET UP menu appears.
SET UP
RETURN
>» ON/OFF TIMER
TAPE REMAIN:T-120
CLOCK SET
CABLE OFF
AUTO PROGRAM
CH ERASE/ADD
~> MENU
Use $ Exit (MERU)
SOO?
ia]
o
S
as (Be
fay zz
gz | |B ae Usa
a 2
If the VIDEO TV is in LINE mode, you cannot select AUTO PROGRAM. Press INPUT
SELECT to change to TV mode.
R
:
(8
8
TIMER ON SCREEN CLEAR
NORMAL/SLOW AUTO/MANU:
v
(STILL ADJUST)
INDEX MARK ERASE
5 Press A+ or V7- to select AUTO PROGRAM.
SET UP
R
ta) a ON/OFF TIMER
a TAPE REMAIN:T-120
CLOCK SET
a CABLE OFF
» AUTO PROGRAM
CH ERASE/ADD
> MENU
(L)
Use $ Exit (MENU)
- Press RETURN.
RETURN
AUTO PROGRAM
RM-Y126
Receivable channels for this TV
VHF: 2- “ ” :
ie ; Ane AUTO PROGRAM” appears on the screen and receivable channels (other than the channels
C Abie? 4-125 already preset) are preset in numerical sequence. The channels previously preset will not
remain in the TV's memory.
When no more channels can be found, the programming stops and the lowest numbered
To select TV channels without presetting channel is displayed
Press 0-9 and ENTER.
To return to the normal screen
Press MENU.
To erase unnecessary channels, or to
add channels that could not be preset
automatically because their signal was too
weak, follow the steps in “Erasing Un-
necessary Channels CHANNEL ERASE”
and “Presetting Only Desired Channels-
CHANNEL ADD” (pp. 15-17).
14 Chapter 1 : Setting Up