Sony Trinitron KV-13VM20 - Presetting TV Channels 0.0.0.0

Presetting
TV
Channels
>
Once you have preset the channels on your VIDEO TV, you will be able to use the channel +/- buttons on the VIDEO TV or the
Remote commander to scan the channel you selected.
Presetting TV Channels Automatically
Perform auto programming during the day rather than late at night, when some channels may
not be broadcasting. :
Press POWER on the VIDEO TV or the Remote Commander to turn the
VIDEO TV on.
POWER OC) cy
2 Using the Menu, select cable off to receive VHF/UHF channel. Select cable
on to receive cable stations.
(Follow the steps in “Turning the Cable Mode On or Off’, p. 12.)
3 Press MENU.
The main menu appears.
MENU
» VIDEO
SET UP
CAPTION VISION
NOISE REDUCTION : OFF
MENU
RETURN} = Exit
4 Press A+ or V- to select SET UP.
MENU
VIDEO
(R) = > SETUP
CAPTION VISION
A NOISE REDUCTION : OFF
“RM-Y126 es
(L) Use > (RETURN = Exit
Chapter 1: Setting Up 1 3
sjauuey) AL Buniasaig
$10 40 up apoy, aigey au Burwny