Sony Trinitron KV-13VM20 - Chapter 4: Using Basic VCR Features; Piaying Back a Prerecorded Cassette Tape; CC Cccsseesecesseeesteeeeneeeeeees

Playback
G
o fr is}
4
a e m nm
D
ac]
OOo Uk GyOrOul
Q
a
bs] b <
m
Zz 5
m
ra) :(} € z =| mn
2
Cl) © © © I)
2:0
U
2
Ss (a
ae iB Bat |f 8 4
NORMAL'SLOW — AUTO/MANUAL
v
«STILL ADJUST)
MARK ERASE
RM-Y126
32 Chapter 4 : Using Basic VCR Features
Playing Back a Prerecorded Cassette Tape
1 Insert a prerecorded cassette into the tape compartment. The VIDEO Tv
automatically turns on.
When playing back rental tapes, NOISE REDUCTION indicator lights at the same time image
detail improves..
2 If playback does not start, press PLAY P. The tape plays back at the speed at
which was recorded.
To stop playback
Press STOP a.
To stop playback for a moment
Press PAUSE 41.
lt» appears on the screen and image will stop on
the screen.
To resume playback, press PAUSE [If or PLAY Pp.
» appears on the screen.
When the tape is played back to the end
The tape is automatically rewound to the beginning
(auto rewind). The power remains on.
To rewind the tape to its beginning and to playback automatically (Auto
Playback Function)
Press AUTO REPEAT on the VIDEO TV during playback or stop mode. The AUTO
REPEAT indicator lights and unti! you press the button again to release AUTO
REPEAT function the auto playback will continuously work.
Variable Speed Playback
You can enjoy playing back pictures in variable speeds on the VCR.
Still Picture
During playback mode, press PAUSE If. To resume normal playback, press PLAY
>» or PAUSE Uf.
+ No sound accompanies the picture, which may be unstable or have video “noise” in it. This
is normal.
* If the VCR is left in the pause mode for more than about 5 minutes, the VIDEO TV re-enters
TV reception mode automatically.