Sony Trinitron KV-13VM20 - Page 26

Using the Timer-Activated Functions
© @ @[
=z 4
foal
2
(a2
RETURN
Cu
TIMER ON SCREEN CLEAR
(STILL ADJUST
INDEX MARK
RM-Y126
To display the time
Press DISPLAY.
To return to the normal screen
Press MENU.
26
The internal clock of this VIDEO TV
operates on a 12-hour cycle.
12:00 AM stands for midnight.
12:00 PM stands for noon.
All the settings including CLOCK will be
erased if you unplug the VIDEO TV ora
power failure occurs. Reset the current
time by following steps 1-8.
If the ON/OFF TIMER or QUICK TIMER
has been set, you can not change the
clock. To change the clock, cancel the
ON/OFF TIMER (p. 29) or QUICK
TIMER(p. 42) first. .
Chapter 3 : Using Advanced TV Features
Press RETURN.
CLOCK
“Set the day” appears on the screen. 2A fmm ame wazenee
RETURN a
Set the day
Use @ fReTuRN «Exit [MENU]
Press A+ or V- to set the day.
Each time you press A+ or V-, the day changes consecutively.
® (a
w =) sy
Press RETURN.
“Set the year” appears on the screen.
CLOCK
2/25/-- FRI -:—-
~ MENU
Set the year
Use ¢
Exit
Press A+ or V- to set the year.
Each time you press A+ or V-, the year changes in sequence and the day of the week
automatically changes.
CLOCK
Press RETURN.
“Set the time” appears on the screen.
2/25/94 FRI 12:00AM
> MENU
Set the time
Use ¢ Exit(NeN)
Press A+ or V’- to set the hour.
Each time you press A+ or V-, the hour changes in sequence starting with
“12:00AM.”
CLOCK
2/25/94 FRI 11:00AM
> MENU
Press RETURN.
: Set the time
Use ¢ Exit (vend)
Press A+ or V- to set the minute.
Each time you press A+ or V-, the minute changes in sequence.
Press RETURN. CLOCK
The setting is completed and the clock starts. 2/25/94 FRI 11:30AM
>» OMENU
Use ¢ (RETURN
Exit