Sony Trinitron KV-13VM20 - Page 9

Connecting Both VHF and UHF antennas
Use the EAC-66 U/V mixer (not supplied).
Prepare the VHF antenna end using the appropriate
1 connector (p. 8).
VHF/UHF
y) Connect the cables to the mixer.
3 Attach the mixer to the VHF/UHF terminal.
When the U/V mixer is used
Snow and noise may appear in the pictures when viewing cable TV channels over 37 (W + 1).
For better picture quality, we would recommend you to connect an outdoor antenna.
Chapter 1: Setting Up 9
aiqeg/euuaiuy A, Buijoauuo9