8
Connections
TV and Cable Box
1 Connect the coaxial cable from your cable service to the IN jack on your cable box.
2 Connect a coaxial cable (not supplied) from the OUT jack on your cable box to the
VHF/UHF jack on the TV.
Optional Connection
❏ To view channels from your cable box, tune your TV to channel 3 or 4 (as set on the rear
panel of your cable box) and use the cable box’s remote control to change channels.
❏ If you will be controlling all channel selection through your cable box, you should
consider using the Channel Fix feature by setting your TV to channnel 3 or 4 (see page 22).
1
From
cable
2
Coaxial
Cable
Cable Box
Rear of TV
01US01COV-BR2TOC.book Page 8 Wednesday, February 18, 2004 11:39 AM
To Next Page
Loading...
