14
Connections
Connecting for Video Tape Editing (VCR and Camcorder)
1 For video tape editing connect to the VCR the following sources (VCR or Camcorder):
a) Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your first
VCR to AUDIO/VIDEO IN on your second VCR
b) Using audio/video cables (not supplied), connect the AUDIO/VIDEO OUT on your
Camcorder to the AUDIO/VIDEO IN on your second VCR
2 Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on the second
VCR to the AUDIO/VIDEO IN on your TV.
Camcorder
(for playback)
A/V output
VCR
(for playback)
VCR (for recording)
Rear of TV
Video (yellow)
Audio L (white)
Audio R (red)
1a
1b
2
01US01COV-BR2TOC.book Page 14 Wednesday, February 18, 2004 11:39 AM
To Next Page
Loading...
