To Next PageTo Next Page
Need help?Do you have a question about the Sony TRINITRON RM-Y194 and is the answer not in the manual?
General| Device Type | Remote Control |
|---|---|
| Brand | Sony |
| Model | RM-Y194 |
| Category | TV |
| Compatible Devices | Sony Trinitron TVs |
| Remote Control Type | Standard |
| Battery Type | AA |
| Technology | Infrared (IR) |
Explains STANDBY/TIMER LED flash codes indicating probable causes.
Procedure for removing the rear cover of the TV.
Procedure for removing the main chassis assembly.
Describes how to place the chassis in a service position.
Detailed steps for removing the CRT picture tube.
Instructions for routing and securing internal wiring harnesses.
Procedure to align the electron beam landing on the screen.
Adjusting the convergence of red, green, and blue electron beams.
Adjusting the focus control for a sharp picture.
Adjusting the screen grid voltage for optimal picture brightness.
Method to confirm and readjust HV hold-down function.
Procedure to confirm and adjust the B+ voltage supply.
Identifies buttons on the remote for service adjustments.
Steps to enter the TV's service adjustment mode.
Procedure to adjust the white balance for accurate colors.
How to confirm that adjusted settings are saved.
Comprehensive list of adjustable parameters and default values.
Table mapping model and destination to configuration IDs.
Adjustments specific to the A Board components.
Adjustments for picture shape and linearity.
Adjustments for picture angle, bow, and PIN.
Visual guide showing the location of main circuit boards.
Information on interpreting PWB layouts and schematic symbols.
Block diagrams and detailed schematics of the TV's circuitry.
Exploded view of the picture tube assembly and its parts.
Exploded view of the main chassis and its components.
