Sony UP-25MD - Operational Warnings and Status; Wait and Cleaning Messages; Ribbon and Transport Mode Warnings

73
Error/Warning Messages
Miscellaneous
PLEASE WAIT
PRINTING MEMORY
PLEASE WAIT
PRINTING MEMORY
In the selected memory page, the captured image is being printed
or queued.
tRetry the operation once the printer finishes printing.
PLEASE WAIT
ADJUSTING HEAD TEMP
PLEASE WAIT
ADJUSTING TEMP
The temperature of the thermal head is being adjusted.
tLeave the printer until this message disappears. The printer
starts printing automatically.
CLEAN HEAD CLEAN HEAD The thermal head requires cleaning.
tRefer to “Cleaning the thermal head and the internal rollers”
on page 65, and clean the head.
You can select whether to display this message with the CLEAN
DISP. setting in the SYSTEM SETUP menu. (See page 61.)
PLEASE REMOVE RIBBON PLEASE REMOVE RIBBON You attempted to enter TRANSPORT MODE with an ink ribbon
loaded inside the printer.
tRemove the ink ribbon before entering TRANSPORT
MODE. (See page 64.)
Warning message Possible causes and remedies
On the video monitor On the printer window display