Sony UP-D897 - Page 20

Procedure after completion of version upgrade
3. Click the | Get VERSION] button.
The installed firmware version is displayed. -
1.. Turn off the power of this unit and PC, and then
disconnect the USB cable.
m VerUp Toa
Current version indication
4.
Check
or
take
a
note
of
the
version
displayed
in
step
3.
(
5.
Click
the
button.
The VUP file information is displayed on another
window.
6. Check the version and date to make sure that the
downloaded firmware is the latest version.
7.
Click
the
button.
The
writing
of
firmware
starts.
(
When
the
writing
starts,
the
LED
backlight
changes
.
from
staying
lit
to
blinking,
the
beep
sound
is
made.
After
this,
the
writing
is
completed
when
the
backlight
changes
from
blinking
to
staying
lit.
8.
Check
that
the
writing
is
completed,
and
then
turn
the
power
of
this
unit
off
and
on
again
(restart).
9.
Start
the
version
upgrade
utility
software.
10.
Click
the
button.
11.
Click
the
button.
12.
Make
sure
that
the
firmware
is
the
latest
version
on
the
utility
screen.
13.
Exit
the
version
upgrade
utility
software.
2-6
UP-D897