Sony UP-D897 - 5-4. Test Pattern Print Count; 5-5. LCD Lighting Check

PA:00
PA:BF
ao
5-4. Test Pattern Print Count
Set the print count of the test pattern printing (PATAN).
SV.QTY SQ C When setting the count to the
continuous printing.
S.Q 9 When setting the count to “9”.
$.Q:1 When setting the count to “1”.
BACK _ Returns to SV.QTY.
foo
UP-D897
PA:7F
5-5. LCD Lighting Check
Check the portion that is not lit by fully lighting the LCD.
LCD (full lighting)
BACK
Check if it is lit.
Returns to LCD when the jog dial is
pressed.
Returns to LCD.